Both put water on crops; they suit different fields and different farms. Benchmark sells both, Valley® pivots and Ocmis hard hose travelers, so here’s how we help growers choose.

Center pivot Hard hose traveler
Field shape Large, fairly regular fields Irregular, small or scattered fields
Labor Low: runs on its own, remote control available Higher: hose is pulled out and the gun moved each set
Pressure and energy Lower operating pressure Higher pressure to drive the gun
Upfront cost Higher per machine Lower per machine
Moving between fields Fixed, or towable within limits Moves anywhere you can pull it
Uniformity Even application along the span More affected by wind

When a pivot makes sense

You farm the same large fields every year, labor is tight, and you want to control water remotely. See Valley center pivots.

When a traveler makes sense

Fields are irregular or scattered, you rotate ground, or you want to start irrigating without the cost of a pivot. See Ocmis travelers.

Many farms run both

A pivot on the home farm and a traveler for the odd fields is common. One pump station can sometimes feed both.

Questions

Which uses less water?

A pivot usually applies water more evenly at lower pressure, so less is lost to wind and runoff.

Can I start with a traveler and add a pivot later?

Yes. Size the pump station with the pivot in mind so you don’t have to replace it.