A pivot that sat all winter needs a walk-through before the first irrigation. Do it a few weeks ahead so there’s time to get parts.

Checklist

Area Check
Tires Pressure, cracks, flats
Gearboxes Oil level and condition, water in the oil, leaks
Drivelines U-joints, shields
Center drive motors Run each tower; listen for noise
Electrical Panel, collector ring, span cable, tower boxes; look for rodent damage
Safety and alignment Test the safety circuit and alignment on each tower
Structure Bolts, flanges, trusses, rods
Sprinklers Missing or damaged heads, regulators, drops
End gun Operation and arc settings
Pump Pump, motor or engine, check valve, pressure gauge
Pipe Leaks at the pivot point and along the main
Controls Panel settings, GPS, remote monitoring connection

Rather we do it? Book pivot service. Need parts? See pivot parts.