For the best irrigation performance two factors are crucial, reducing the kinetic energy of the water impact onto the soil and controlling wind drift. Delivering a consistent droplet size greatly reduces the loss from wind drift of the fine droplets/mist. In addition, a controlled consistent droplet size and uniform distribution of the droplets within the sprinkler pattern reduces the impact force typical of larger droplets on the soil. These kinds of droplets can cause soil sealing which in turn reduce the soil’s water intake rate, increasing the possibility of runoff and thus keeping the water from reaching the target root zone.
Senninger Irrigation offers a wide range of water application solutions for agricultural crops. Products are designed to increase irrigation efficiency by using low, energy savings pressures and applying water with high uniformity. Senninger sprinklers and components reduce runoff, over application and soil compaction. Plus, they are made out of durable thermoplastics for a long life.
With the heavy-duty reliability of Nelson’s 800 Series Control Valves and the introduction of the new 1000 Series valves and TWIG® Wireless Control System the traditional Solid Set Big Gun® system can be transformed into something quite revolutionary. Automate water application in feedlots, dairies, pastures, berry plantings, sugar cane fields and irregular shaped areas such as pivot corners.
Root Demand Irrigation
* RDI tackles your toughest irrigation challenges, from soil conditions and weather to lost acres and limited water supplies.
* Whether you have an irregularly-shaped field or hard to water corners, RDI reaches those challenging acres completely and efficiently.
* Buried beneath the roots, RDI is perfectly positioned to sense the exudates and supply water precisely where and when it’s needed.
Agri-Inject Variable Rate Injection Agri-Inject
While you’ll find Agri-Inject fluid injection systems used in a wide array of agriculture, golf, turf, potato, vegetable and other specialty crops applications, our technology is perfectly-suited for many other situations where a controlled or metered flow of a liquid is desired.
LiquiTube is a one-time treatment that lasts for the life of the tire. It will seal up to 3/4″ punctures in heavy-ply treads, as well as all bead, rim & slow air leaks. An over-the-road tire that is treated with LiquiTube will run up to 30 degrees cooler, because the sealant acts as an insulator and dissipates the heat evenly throughout the tire. Because of this, retreaders can sometimes get an extra rep out of a set of casings.
By keeping tires properly inflated, LiquiTube makes them less susceptible to blowouts, thereby enhancing driver safety. A tire treated with LiquiTube remains treated, even if the trailer sits for a year or more. Fleet managers no longer need to worry about tires on inactive vehicles going flat.
LiquiTube is 100% water soluble, and washes out with a hose. It is NOT a petroleum-based sealant (like the green stuff), so it’s clean to work with and safe to wash down any drain. LiquiTube is guaranteed to remain liquid in the tire for as long as it is in use. It will never separate or break down, and has an indefinite shelf life.